~~~~~~~~~~~~~~~~~~
This release note and the software that accompanies it are copyright (c) 2018, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software.

This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation.
~~~~~~~~~~~~~~~~~~

EEPROM image package WW47-18
November 21, 2018
Project: Buchannan Pass SFP+ Baseboard
LAN controller: B0/B1/B2 Lewisburg Fort Park

Package Contents
----------------
NVMUpdatePackage - Customer update package.
BOOTUTIL64E.efi - Utility used to manage OpROM options (Remote boot).
celo64e.efi - Utility used by manufacturing.
eeupdate64e.efi - Utility used to program MAC address - DO NOT DISTRIBUTE OUTSIDE OF INTEL (NDA Customers only)
lanconf64e.efi - Utility used to update controller and PHY NVM images - DO NOT DISTRIBUTE OUTSIDE OF INTEL (NDA Customers only)
LBG_B2_Buchannan_Pass_SFI_2x10G_P01_NCSI_OROM_4p00_80001573.bin - 10G/1G Bx LBG Controller NVM image for SFP+ Ports 0 & 1
readme.txt - This file.
Remote_Boot_and_Storage_Guide.pdf - Guide for remote boot configuration

Release Notes
-------------
WW47-18 - Update NVM image with features to support MSFT WS2019.
WW34.5 - Disable PXE OpROM & Title display during POST. Update to latest NVM v3.50
WW34 - Azure defect fixes, new OpROM/EFI driver
ww20
- Fix port mapping
- Azure defect fixes

ww09
- PV NVM
- Secure boot feature enabled

WW02
- Fix LED behavior
- Included signed PXE, iSCSI, uEFI OpROM's

WW42 
- Initial OB 10G/1G NVM image.

Enable or Disable boot OpROM
----------------------------
In order to switch between PXE and iSCSI OpROM for boot it is required to set which OpROM will be used for boot. By default PXE OpROM is used for boot.

1. Run the command "BOOTUTIL64E.efi -all -BOOTENABLE=[PXE or iSCSI]".
2. To disable OpROM boot run the command "BOOTUTIL64E.efi -all -BOOTENABLE=DISABLE".